DIY House Wiring Corrections

 







         

Unless your home is new or was built in the last 5 years there’s a good chance you may have some kind of electrical components that are not up to code. Whether the problem is outdated electrical wiring or you purchased a house that was someone else’s flipper investment, or it just is a home that the previous owner liked to do all of their own remodel and maintenance, electrical wiring that is not up to code can put your home and family at risk.

Old Wiring

If your home happens to be really old you may encounter what is referred to as knob and tube wiring. When the home was built it was considered state-of-the-art electrical technology. Today knob and tube wiring is considered very dangerous because the wires aren’t grounded, the circuits support lower amperage than is needed today, and the wires feature insulation that disintegrates over time. Because of these issues, most insurance companies refuse to insure buildings with knob and tube wiring.

Solution

If your home was built before 1950 and the wiring hasn’t been updated, hire an electrician to inspect your home. A lot of home buyers sometimes are led to believe that the home inspector that came out to inspect the home before you purchased it, are licensed electricians or that they will catch everything that is a violation while they inspect your home. The truth is, most are not electricians, and even if they are, they can’t find every problem. If after you purchased your home and you find evidence that knob and tube wiring is present, you should have an electrical contractor come out to verify, and then most likely have that method of wiring removed and bring all of the house wiring up to current code. This can amount to a costly task, but when you are talking about the safety of your home and family, I feel that it is a necessary cost. If your are up to it you may find that some of this work you may be able to fix your self to help cut the cost. Just remember the whole point is to modernize the wiring and bring it up to code, so be sure you are aware of the latest codes if you decide to tackle some of the work yourself.

Adding New Light Fixtures

A common wiring issue that comes up while updating older homes is overheating existing house wiring after replacing light fixtures. New light fixtures can overload old wiring because they are rated to operate at a hotter temperature. Modern lights are manufactured with wires meant to withstand 90 degrees C, while old wires are rated for just 60 degrees C. So, what can happen after installing new lighting is that it can basically cook the old insulation off the existing wiring, which can cause shorts and or a fire.

Solution

If your home has wiring from before 1987, install a splice box and at least three feet of new wiring to connect a new light fixture to old wiring. This prevents you from having to rewire the entire circuit. If you’re unsure how old your wiring is, look for a date stamped on the insulation jacket. Wires manufactured after 1987 have a date; those made before 1987 have no date.

https://amzn.to/3a1hfez

Non-IC Rated Can Lights

Recessed lights that come in direct contact with attic insulation must be IC-rated. Otherwise, you must keep three inches of space between the light and the insulation. When non-IC-rated lights touch insulation, they can overheat and stop working. Over time, thermal protectors may fail and allow the light to stay on despite extreme heat, potentially causing a fire.

Solution

Inspect the can lights. If you find that they are not IC rated, and that there is insulation coming in contact with them or closer than three inches, you will need to make sure that all insulation is at least three inches or more from the can lights. The other option is to replace them with IC-rated versions.

https://amzn.to/3iumfMc

Illegal Wiring

Splices are some of the most common code violations when it comes to wiring. Most illegal splices happen when someone decides to add more receptacles or move light fixtures. If the splice is not made inside of an approved junction box then it is against code. So is trying to splice too many wires in a junction box that is not rated for the number of wires installed in it. Bigger is better when it comes to wire splicing, and it makes the wires easier to work on.



https://amzn.to/3sCcUGV

Solution

If you encounter illegal splices, then you will need to get an approved junction box to contain the spliced wires. Mount the junction box, run the wires into it, splice the conductors using the appropriate wire nuts and install a cover plate over the box.

In conclusion, we all like to save money. When it comes to our homes it seems like maintenance is that one thing that always cost more than we expect. So, if you do a little research and ask for some help usually you can cut down on the amount of money spent on your home improvements and emergency repairs. When it comes to electrical there really is a lot of things as a homeowner you can do yourself. If you fell it is out of ability to tackle an electrical problem yourself, and it looks to be a little too complicated, you should hire or at least consult an electrical contractor. In some cases, by having the professionals do it to start with is where the money will be saved.

 

Common Electrical Problems and Fixes

No matter if you own a home or are a renter, we all have different electrical problems that drive us nuts. The worst part is how long we with live with these annoying issues until we finally fix them. This is some of the most common ones that I most regularly get calls on to fix. Some of these you can do yourself as long as you feel confident and follow some simple DIY steps. If you are ever in doubt please call a certified electrician to help you remedy these common problems.

Loose Outlets

Outlets don't last forever especially the cheaper ones. To get started turn off the breaker. Double check that voltage to the outlet is off using a volt meter or just plug in a lamp and see when it goes off. Replace the outlet with the same one that you take out, or you can upgrade it to the most current code required receptacle like the tamper resistant style. Take notice as to where the wires are connected on the receptacle. The black wire is connected to the brass-colored screw and the white wire is connected on the silver-colored screw. Lastly the bare or in some cases the green wire goes to the green screw or ground terminal on the receptacle. Also, you may have an outlet that doesn't sit flush to the wall. To fix this issue there are several sheetrock shims or plaster ring products to remedy this problem.

  

https://amzn.to/3oHOLwp

Flickering or Dimming Lights

This could be a sign of a poor connection and can lead to eventual arcing – loose/corroded connections making intermittent contact that could result in sparking, overheating, and fire. In a case like this unless you have extensive electrical training your best bet is to call an electrical contractor.






https://amzn.to/2KhGBMk

Light Bulbs Burn Out Frequently

If you’re experience frequent bulb blowouts, it could be cheap light bulbs that are only rated 120volt. If you are still using incandescent bulbs in your home make sure they are 130volt rated. LED bulbs are the best way to avoid bulb burn outs. Recessed can lights that frequently fail? This could be a sign that the insulation is too close to the can light housing. Overheating can occur and these fixtures are designed to shut off when they get too hot to prevent fire.




https://amzn.to/3bC6Lob

Warm Outlets or Switches

Unless it is a dimming switch, Light switches and warm outlets are as a serious safety concern and should be addressed by a licensed electrician immediately.

Broken Light Switch

Turn off the circuit breaker (the light will go out when you choose the right one). Use a flathead screwdriver to remove the faceplate and a Phillips head to remove the light switch. Test the two wires connected to the screw for electricity. After you have verified that the power is off, remove the broken switch and install the new one.


https://amzn.to/39xAThV

Tripped Breakers or GFCI

Some electrical appliances, such as hairdryers, space heaters, vacuum, or griddle can frequently trip circuits. Go to your electrical panel to see if a breaker has tripped. If there is, turn it all the way to the off position and then back on. If there are no breakers off then check to see if there is a GFCI receptacle on the circuit that may need to be reset. Sometimes there may even be a GFCI or AFCI breaker that needs to be reset in your panel. It’s the breakers with the little yellow or green reset button. Reset the breaker. If this solves your power outage great! You now know where the problem is and how to get it back on. If you still get the same problem occurring then it’s time to call an electrician to see if you have an overloaded circuit or some other issue. Tripping breakers are to protect your wiring and appliances and also let you know there could be a problem on the circuit.



https://amzn.to/3qiGhMx








https://amzn.to/3smalZx

 

Electrical is Always Changing!

Being an electrician for over 20 years, it never ceases to amaze me how fast electrical products and installation practices change year to year and sometimes month to month. The longer that I am in the trade the more I see the importance of staying up with trends, new products and also keeping up with continuing education. Looking back at jobs I have worked on years ago compared to jobs today, I am amazed sometimes how I have had to evolve and change how I used to install equipment, raceways, bonding methods, environmental controls, and emergency backup systems.

 

https://amzn.to/38AIo8g

https://amzn.to/3oAYowS

                                                                                                                                                             

The learning never stops, systems constantly need to be replaced or upgraded. Some of the electricians I work with say to me that they liked how things used to be without all the over-the-top safety standards, safety gear they are forced to use, constant safety training and daily hazard assessments. I admit that even I get a little frustrated with safety protocols at times but the truth is with these ever-evolving safety standards on jobsites I am insulated from being exposed to electrical hazards every day. I remember just a few years back it was acceptable to work in a hot electrical panel with just a pair of leather gloves and just a couple years before that we were told to just work in a live panel with one hand behind your back! wow, things really have changed. I remember as an apprentice standing on a ladder bare handed cutting a service drop to a 200-amp meter on a house. At the time I was taught to be aware of what I was doing, confident in my electrical knowledge, and my training. I was very lucky to have been able to be mentored by a handful of some of the best electricians in the trade who taught me the right way to be an electrician and that short cuts are never expectable and only cause property damage and can even get people killed.

     

Agricultural Controls

LED Lighting in Your Home, Saving Money

One of the simplest ways to save money on your electrical bill is to change all your lighting to energy efficient LED bulbs and fixtures. Most homeowners don't realize just how much money they can save just by changing over to LED bulbs a fixtures.




https://amzn.to/39hwrns





All the light fixtures in my house were over 15 years old. I can't even imagine how many incandescent bulbs have been replaced over 15 years not to mention the extra energy wasted over that time period. My kitchen had those old can lights with the black baffles, yuck! they were so out dated. What a difference it made to install all new LED can trims. Better yet, they are so easy to replace. There is no need for an electrician to come out, they just screw right into the old bulb socket and your done! They make multiple styles with multiple color spectrums that will brighten any room in your home.






https://amzn.to/3bjH9fu




Garage lights? Yep I changed out all those too!







https://amzn.to/38odqjN





I even replaced those old halogen style under cabinet lights. Wow! what a difference it made. The old ones were very hot and yellow in color. I love the new look after changing them and it uses so much less energy.






https://amzn.to/3i00JPu



Do you have a green thumb? I do, and yes purchased LED grow lights for my garden starts. If live in an area with a short growing season well then you know it is very hard to have a garden without getting your veggies a head start. I haven't yet built a green house but for now I just purchased a couple of these LED grow lights. They are amazing! I grow corn, acorn squash, avocadoes and also in the middle of the winter I even let my house plants get more light during those dark months.





https://amzn.to/39arHQr




Less power, great growth



Avocado tree


Speaking of dark winter nights, the old outdoor barn lights were mercury vapor and they really used the electricity! I purchased two new LED barn lights with built in dusk till dawn sensors and I couldn't be happier with how bright they are.

https://amzn.to/2MKCQzR

T.P.O. Chem-Curb Residential Roof Solar Install

There is a wide variety of roof types on homes all over the word, with this being said no matter what style roof you have there is a solution to install solar on your home. In some cases it may be best for it    not to be installed on your roof in the first place!

                                                                                                   

Chem-Curb TPO/Membrane Roof

In the case that you have a T.P.O. roof composite or similar, there are always some great options on the market to choose from. The methods and materials are always changing. The products that I may have used on projects five years ago in some cases may not even be recommended now due to new and improved products that are now available on the market.

 

Chem-Curb TPO/Membrane Roof

If you are a homeowner looking to have solar installed don't worry too much about whether or not you are getting the newest solar products on the market. As fast as the solar industry is changing, solar companies don't have much choice but to be on the cutting edge of the newest solar products. If for some reason they aren't keeping up with the latest products, industry trends and installation methods then most likely if they aren't already out of business, then they soon will be!

Residential Solar on Metal Roof

Corrugated metal roof

With a good solar company you should be satisfied and pleased with the finished project on your home. It goes without saying that it should function properly,  be code compliant and pass inspection when finished. 

In addition to that, as a  homeowner making an investment as big as solar, the finished product should also compliment your home, add value to it and you as the homeowner should like the way it looks on your home.  As with most construction projects attention to detail and great craftmanship usually translate to a better functioning and longer lasting system. 

Inverter, Disconnect, Utility connection

   

Solar does not have to look good to function properly. 

In my 20+ years in the electrical trade, it has been my observation that when the company takes the time to also make sure that the job looks great, then in most cases it also tends to hold up to the elements better, perform at peak efficiency, and in a lot of cases it cost you as the homeowner less in maintenance expenses later on. 

Bad installation practices, unqualified installers, cheap equipment can also lead to a long list of problems including roof leaks and even fires. Any of these problems will cost you a lot of money.  

Residential solar, Hilo Hawaii

Residential Solar on Copper Standing Seam Metal Roof

No matter the roof type you have, there is always a product solution to fit your home. Not all these methods are priced the same. For instance on a copper roof the price can really go up! You have to be sure that you have the correct attachment method that is approved to be installed on your roof type. If it not an approved method for your roof type, then it will cause all sorts of problems later and cost you lots of money to fix it.  

Copper roof  Kukio Hawaii

Utility tie in  Kukio Hawaii

   

When it comes to solar projects, there is a vast amount of companies to choose from. They all have a preferred method of installation and all have certain equipment that they like to use.  As you would expect not all companies are created equal nor is the equipment they install on your home. Do your research before you hire a solar company to install your project. Solar can be a big investment and you should get the best installation possible with good equipment. If you shop around you will find the right company for your job at a competitive price.  

Kukio Hawaii

Kukio Hawaii

Kukio Hawaii